Professional Communication equipment manufacturer Since 2013
Our main focus now is to enhance our core competitiveness. It is widely known that by utilizing those technologies, Wanglink SFP Transceiver 1.25Gbps SFP BIDI Transceiver 20KM Reach Tx1310nm/Rx1550nm quality can be guaranteed.It is manufactured to be used in the field(s) of Fiber Optic Equipment.
There are so many different Wanglink SFP Transceiver 1.25Gbps SFP BIDI Transceiver 20KM Reach Tx1310nm/Rx1550nm products for different age groups and budgets. At Shenzhen Wanglink Communication Equipment Technology Co., Ltd., it is our goal to provide the highest quality products and superior service to our customers, both being our top priority. Wanglink SFP Transceiver 1.25Gbps SFP BIDI Transceiver 20KM Reach Tx1310nm/Rx1550nm is not only manufactured to draw the attention of people but also to bring them convenience and benefits. Designed by creative designers, network switch, Media converter, Gpon epon, Fiber optical accessories. presents a style of aesthetics. In addition, it is excellent characterized thanks to the adopted high-quality raw materials and high-end technologies.
| Model Number: | WOR-1000M-SS-20KM-LC-1310 | Type: | FTTx Solutions, SMF |
| Place of Origin: | Guangdong | Brand Name: | wanglink |
| Use: | FTTX | Key Feature1: | sfp optical transceiver |
| Key Feature2: | BIDI Transceiver | Key Feature3: | 20km sfp transceiver module |
| Connector: | Duplex LC | Distance: | 20km |
| Wavelength: | 1310nm/1550nm | Compatible: | Huawei, H3c,Cisco,Hp |
| Material: | Iron | Product status: | Stock |
| No. of Fiber: | 1. |
Wanglink Gigabit converter 4 ethernet port 2 uplink port POE switch small lan awitch WOR-906-POE switch is designed to meet the POE power supply demand, and adopts high-speed Ethernet chip, which contain 4 port RJ45 port for POE power supply and 2 port RJ45 uplink port. The 4 port PoE rj45 port all support IEEE802.3AF/AT standard to supply the power to the Powered Device, and each port maximum 30W, whole device maximum 72W. Automatic detection and identification of electrical equipment that meets the IEEE802.3AF/AT standard and supply the power for the device through UTP cable.
","text":"Wanglink Gigabit converter 4 ethernet port 2 uplink port POE switch small lan awitch WOR-906-POE switch is designed to meet the POE power supply demand, and adopts high-speed Ethernet chip, which contain 4 port RJ45 port for POE power supply and 2 port RJ45 uplink port. The 4 port PoE rj45 port all support IEEE802.3AF/AT standard to supply the power to the Powered Device, and each port maximum 30W, whole device maximum 72W. Automatic detection and identification of electrical equipment that meets the IEEE802.3AF/AT standard and supply the power for the device through UTP cable."}}],"style":{"verticalAlign":"top","paddingBottom":4,"boxSizing":"border-box","paddingTop":4},"type":"container"}],"mobileStyle":{"verticalAlign":"top","paddingRight":4,"boxSizing":"border-box","paddingLeft":4},"style":{"verticalAlign":"top","display":"inline-block","paddingRight":4,"boxSizing":"border-box","paddingLeft":4},"type":"container"}],"style":{"verticalAlign":"top"},"type":"container"},"config":{"columnCount":3,"titleKey":5,"products":[60779640694,62186158081,60793684337,60794150827,1600054323725,1600054368219]}}},"version":1}" class="icbu-pc-detailSellerRecommend magic-1">The SFP-BIDI transceivers are high performance, cost effective modules supporting dual data-rate of
1.25Gbps/1.0625Gbps and 20KM transmission distance with SMF.
The transceiver consists of three sections: a FP laser transmitter, a PIN photodiode integrated with a
trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety
requirements.
The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further
information, please refer to SFP MSA.
Features
Dual data-rate of 1.25Gbps/1.063Gbps operation
1310nm FP laser and PIN hotodetector for 20KM transmission
Compliant with SFP MSA and SFF-8472 with simplex LC receptacle
Digital Diagnostic Monitoring:
Internal Calibration or External Calibration
Compatible with SONET OC-24-LR-1
Compatible with RoHS
+3.3V single power supply
Operating case temperature range:
0 °C to +70 °C (Commercial)
-40 °C to +85 °C (Industrial)
Applications
Gigabit Ethernet
Fiber Channel
Switch to Switch interface
Switched backplane applications
Router/Server interface
Other optical transmission systems
1. Connected directly to TX data input pins. AC coupled thereafter.
2. Or open circuit.
3. Into 100 ohms differential termination.
4. 20 – 80 %
5. Loss Of Signal is LVTTL. Logic 0 indicates normal operation; logic 1 indicates no signal detected.
6. Receiver sensitivity is compliant with power supply sinusoidal modulation of 20 Hz to 1.5 MHz up to specified value
applied through the recommended power supply filtering network.
1. TD+/- are internally AC coupled with 100Ω differential termination inside the module.
2. Tx Fault and Rx LOS are open collector outputs, which should be pulled up with 4.7k to 10kΩ resistors on the
host board. Pull up voltage between 2.0V and Vcc+0.3V.
3. RD+/- outputs are internally AC coupled, and should be terminated with 100Ω (differential) at the user SERDES
1. Measured with Light source 1310nm (1550nm), ER=10dB; BER =<10^-12 @PRBS=2^23-1 NRZ.
2. When LOS de-asserted, the RX data+/- output is signal output.
1. When high, this output indicates a laser fault of some kind. Low indicates normal operation. And should be pulled up with a 4.7 – 10KΩ resistor on the host board.
2. TX disable is an input that is used to shut down the transmitter optical output. It is pulled up within the module with a 4.7 – 10KΩ resistor. Its states are:
Low (0 – 0.8V): Transmitter on (>0.8, < 2.0V): Undefined
High (2.0V~Vcc+0.3V): Transmitter Disabled Open: Transmitter Disabled
1) Prompt delivery and remarkable services .
2) Competitive selling prices
3) Rich experience of OEM & ODM co-operation
4) 100% new materials for production and 100% reliable quality
A: Yes, we welcome sample order to test and check quality. MOQ is 1 for normal products.
A: Sea transportation & Air transportation & Express ( DHL / UPS / TNT / Fedex / EMS ). Air transportation & Express usually take 3-5 days to arrive.
A: Yes, we provide OEM/OEM service and make the products with your own label.
GET IN TOUCH WITH US
Wanglink over the years has always adhered to "quality of products in order to survive, credibility and development services" business purposes. Committed to providing you with high-quality products and quality services. We expect to expend more cooperation and make a win-win future!
Our main products include network switch, media converter, gpon, epon, poe switch, fiber switch, accessories.We provide customers with various customized services from hardware to software.