PRODUCTS

HOME > PRODUCTS

Recommended

Replay

Recommended

Wanglink 10G BIDI SFP+ Transceiver Module

Wanglink 10/100/1000mbps 20km LC SFP optical transceiver

Wanglink 1.25Gbps BIDI 20KM SFP Transceiver

Wanglink PX20+ 3.5-4.5DBM GEPON EPON OLT Optical Module

Wanglink - Wanglink 1.25Gbps single mode dual fiber 1310nm 20km LC interface sfp module 1000M Optical module

Wanglink - Wanglink 1.25Gbps single mode dual fiber 1310nm 20km LC interface sfp module 1000M Optical module manufacturer

Wanglink - Wanglink 1.25Gbps single mode dual fiber 1310nm 20km LC interface sfp module 1000M Optical module company

Wanglink - Wanglink 1.25Gbps single mode dual fiber 1310nm 20km LC interface sfp module 1000M Optical module

After Wanglink 1.25Gbps single mode dual fiber 1310nm 20km LC interface sfp module launching into the market, we have gained a lot of support and praise. Most customers think that this kind of products are in line with their expectations in terms of appearance and performance.In addition, is widely used in Fiber Optic Equipment.

SEND INQUIRY NOW

Shipping:: Express Sea freight · Land freight · Air freight

SEND INQUIRY NOW

Products Details

As an innovation-driven company,Shenzhen Wanglink Communication Equipment Technology Co., Ltd. has been devoted to product development for years. We are proud and excited as well to announce that we have successfully developed Wanglink 1.25Gbps single mode dual fiber 1310nm 20km LC interface sfp module. And precisely because of the clear core selling point of Wanglink 1.25Gbps single mode dual fiber 1310nm 20km LC interface sfp module, not only does the product have a high reputation among customers, but also allows the product to have a high degree of intimacy among customers. Shenzhen Wanglink Communication Equipment Technology Co., Ltd. have always advocated the customer-centric business concept, aiming to provide customers with specialized, standardized, and diversified services. We focus on technology development and hope to make some innovations backed by strong technical strength.

Model Number:	WOR-1000M-SS-20KM-LC-1310	Type:	SFP Module, SMF
Place of Origin:	Guangdong	Brand Name:	wanglink
Key Feature1:	1.25Gbps SFP Optical Transceiver	Key Feature2:	1310nm 20km LC interface sfp module
Key Feature3:	optical transceiver	Connector:	LC
Distance:	20km	Wavelength:	1310nm
DDM:	With DDM	Product status:	Stock

Recommend Products

POE switch small lan awitch

","text":"Wanglink Gigabit converter 4 ethernet port 2 uplink port POE switch small lan awitch"}},{"children":[{"children":[{"mobileStyle":{"padding":0,"margin":0,"fontSize":14},"style":{"padding":0,"margin":0},"id":"paragraph0","type":"paragraph","props":{"html":"

Wanglink Gigabit converter 4 ethernet port 2 uplink port POE switch small lan awitch WOR-906-POE switch is designed to meet the POE power supply demand, and adopts high-speed Ethernet chip, which contain 4 port RJ45 port for POE power supply and 2 port RJ45 uplink port. The 4 port PoE rj45 port all support IEEE802.3AF/AT standard to supply the power to the Powered Device, and each port maximum 30W, whole device maximum 72W. Automatic detection and identification of electrical equipment that meets the IEEE802.3AF/AT standard and supply the power for the device through UTP cable.

","text":"Wanglink Gigabit converter 4 ethernet port 2 uplink port POE switch small lan awitch WOR-906-POE switch is designed to meet the POE power supply demand, and adopts high-speed Ethernet chip, which contain 4 port RJ45 port for POE power supply and 2 port RJ45 uplink port. The 4 port PoE rj45 port all support IEEE802.3AF/AT standard to supply the power to the Powered Device, and each port maximum 30W, whole device maximum 72W. Automatic detection and identification of electrical equipment that meets the IEEE802.3AF/AT standard and supply the power for the device through UTP cable."}}],"style":{"verticalAlign":"top","paddingBottom":4,"boxSizing":"border-box","paddingTop":4},"type":"container"}],"mobileStyle":{"verticalAlign":"top","paddingRight":4,"boxSizing":"border-box","paddingLeft":4},"style":{"verticalAlign":"top","display":"inline-block","paddingRight":4,"boxSizing":"border-box","paddingLeft":4},"type":"container"}],"style":{"verticalAlign":"top"},"type":"container"},"config":{"columnCount":3,"titleKey":5,"products":[62140898440,1600095984533,1600104176125,1600315183512,62592406093,1600315175529]}}},"version":1}" class="icbu-pc-detailSellerRecommend magic-1">

Product Description

Wanglink 1.25Gbps single mode dual fiber 1310nm 20km LC interface sfp module

The SFP transceivers are high performance, cost effective modules supporting data-rate of 1.25Gbps

and 20KM transmission distance with SMF.

The transceiver consists of three sections: a FP laser transmitter, a PIN photodiode integrated with a

trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety

requirements.

The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further

information, please refer to SFP MSA.

Features

 Data-rate of 1.25Gbps operation

 1310nm FP laser and PIN photodetector for 20KM transmission

 Compliant with SFP MSA and SFF-8472 with duplex LC receptacle

 Digital Diagnostic Monitoring:

Internal Calibration or External Calibration

 Compatible with SONET OC-24-LR-1

 Compatible with RoHS

 +3.3V single power supply

 Operating case temperature:

Standard : 0 to +70°C

Extended : -20 to +85°C

Industrial : -40 to +85°

Applications
 Gigabit Ethernet

 Fiber Channel

 Switch to Switch interface

 Switched backplane applications

 Router/Server interface

 Other optical transmission systems

Products Show

1) Connected directly to TX data input pins. AC coupled thereafter.

2) Or open circuit.

3) Into 100 ohms differential termination.

4) 20 – 80 %

5) Loss Of Signal is LVTTL. Logic 0 indicates normal operation; logic 1 indicates no signal detected.

6) Receiver sensitivity is compliant with power supply sinusoidal modulation of 20 Hz to 1.5 MHz up to specified value

applied through the recommended power supply filtering network.

7) With worst-case extinction ratio. Measured with a PRBS 27-1 test pattern, @1.25Gb/s, BER<10-12 .

8) Jitter added by receiver (peak to peak). Measured at –18.0dBm average Rx sensitivity, PRBS 27-1 test pattern.

9) Circuit ground is internally isolated from chassis ground.

10) T

FAULT

is an open collector/drain output, which should be pulled up with a 4.7k – 10k Ohms resistor on the host board

if intended for use. Pull up voltage should be between 2.0V to Vcc + 0.3V. A high output indicates a transmitter fault

caused by either the TX bias current or the TX output power exceeding the preset alarm thresholds. A low output

indicates normal operation. In the low state, the output is pulled to <0.8V.

11) Laser output disabled on T

DIS>2.0V or open, enabled on T

DIS<0.8V.

12) Should be pulled up with 4.7k - 10kohms on host board to a voltage between 2.0V and 3.6V. MOD_DEF(0) pulls line

low to indicate module is plugged in.Transmitter Disabled

Our Certifications

Our Company

About Factory

Wanglink headquarter is located in Shenzhen Xiaxue Industry Park , where is a China Hi-tech Industrial Park, covering an area of 20 square kilometers,Brought together many advanced enterprises in the communication industry.Wanglink is one of the important enterprises in this Creative Industrial Park, gaining great support from local government. It is with registered capital of 5 million RMB, covering an area of nearly 2000 square meters for R&D, marketing & sales office.

Since 2013 years, wanglink has invested more than 100 million yuan in production research and development.We are fully capable of accepting customers' OEM, ODM requirements for products, and targeted products that are suitable for customers.With rapid development and intensive research work, Wanglink has developed over 400 models in 4 major series, ONU / Switch / SFP / Media converter in dependently. Each series has passed CE Certification,

Formed a complete and highly customizable FTTH/FTTB/FTTX industry chain

Factory Detail

Wanglink obtain the certification of ISO 9000:2000 Quality Management System in June 2015 and the certification of ROHS,CE, FCC in November 2017.

PCB board design and production

Old-Testing Room

Soldering

Warehouse

Customer Photo

2019 CIOE Exhibition

Each year, Wanglink has the plan to go to the world to participate in the exhibition, Brazil, India, Thailand, Vietnam ....., until now,We have established good business relations with more than 100 countries around the world.

2019 Vietnam ICT COMM

We got many friendship, and hope every our business come to win-win situation.each year, we will visit our friend all over the world.

Organized by the Ministry of Industry and Trade of Vietnam and the Ministry of Information and Communication of Vietnam, ICT COMM Vietnam is jointly organized by Vietnam’s largest exhibition service company “ADPEX” United Stock Company and Vietnam Innovation and Promotion Exchange Center (Vietnam Post and Telecommunications Group). Communication electronic ICT professional exhibition.

2018 CeBIT ASEAN Thailand

CeBIT is the world's largest authoritative exhibition in the fields of information, communications and software. CeBIT ASEAN Thailand, Bangkok International Information and Communication Technology Exhibition, is held in Bangkok, Thailand. The frequency of the exhibition is once a year. It is a series of exhibitions held by the Hannover Messe in Southeast Asia.

FAQ

Q:Why choose Wanglink?

1) Prompt delivery and remarkable services .
2) Competitive selling prices
3) Rich experience of OEM & ODM co-operation
4) 100% new materials for production and 100% reliable quality

Q: Can I have a sample order? What is your MOQ?

A: Yes, we welcome sample order to test and check quality. MOQ is 1 for normal products.

Q: How do you ship the goods and how long does it take arrive?

A: Sea transportation & Air transportation & Express ( DHL / UPS / TNT / Fedex / EMS ). Air transportation & Express usually take 3-5 days to arrive.

Q: Could I use our own logo and label?

A: Yes, we provide OEM/OEM service and make the products with your own label.

Basic Information

Year Established

--
Business Type

--
Country / Region

--
Main Industry

--
Main Products

--
Enterprise Legal Person

--
Total Employees

--
Annual Output Value

--
Export Market

--
Cooperated Customers

--

Wanglink 10G BIDI SFP+ Transceiver Module

10G BIDI SFP+ Transceiver Module 10GBASE-BX TX1270nm RX1330nm 10KM 20KM SFP Module Compatible with CISCO can be produced in varied specifications to cater to different needs of customers,which has a vast variety of application.Besides,it adheres to concise structure and high quality is the design principle.
Wanglink 10/100/1000mbps 20km LC SFP optical transceiver

Advanced technology plays a key role in the manufacturing process for a company. We have been consistently improving manufacturing tools.Since we have carefully reviewed every application scenario, we have confirmed that 1.25g 1310nm phyhome olt sfp module 10/100/1000mbps china supplier 20km LC sfp optical transceiver is indispensable in the field(s) of Fiber Optic Equipment.
Wanglink 1.25Gbps BIDI 20KM SFP Transceiver

Our main focus now is to enhance our core competitiveness. It is widely known that by utilizing those technologies, Wanglink SFP Transceiver 1.25Gbps SFP BIDI Transceiver 20KM Reach Tx1310nm/Rx1550nm quality can be guaranteed.It is manufactured to be used in the field(s) of Fiber Optic Equipment.
Wanglink PX20+ 3.5-4.5DBM GEPON EPON OLT Optical Module

To a large extent,the Fiber Optic Equipment's appearance, features, packages, etc. can be the important factors that attract customers. In the process of development of network switch, Media converter, Gpon epon, Fiber optical accessories., our designers have been following the latest trend and analyzing customers' tastes, thereby, making the network switch, Media converter, Gpon epon, Fiber optical accessories. unique in its structure and design style. As for its features, we try to make it outstanding by adopting high-level raw materials.

PRODUCTS

Send your inquiry

*Name
Format error
*E-mail
Format error
*Phone/WhatsApp/Skype
Format error
*Company Name
Format error
*Content
Format error